Author Topic: Longer throttle cable for use with bar risers  (Read 731 times)

Lotus54

  • Full Member
  • ***
  • Posts: 135
    • View Profile
Longer throttle cable for use with bar risers
« on: February 21, 2014, 03:17:23 AM »
I'm using 2" bar risers. That means the stock throttle cable is just barely long enough.

I sent a stock cable to Barnett and had a longer one made.
It works perfectly with the  risers.

I'll post up the part number, but if anyone wants one- they should have the number.


Mark
2014 OSSA Explorer

BigBadDon

  • Jr. Member
  • **
  • Posts: 65
    • View Profile
Re: Longer throttle cable for use with bar risers
« Reply #1 on: February 21, 2014, 03:51:23 AM »
Perfect - that will be a good reference.

I put on 1.5" risers.  I re-routed the stock cable on the inside of the fork so it would not bind on lock to lock turns.  But it is still a little snug.

Lotus54

  • Full Member
  • ***
  • Posts: 135
    • View Profile
Re: Longer throttle cable for use with bar risers
« Reply #2 on: February 21, 2014, 03:57:49 AM »
With the longer cable I could route it much better, so it has a gentler radius also.

   I'll get the  number.


Mark
2014 OSSA Explorer